SDS

CRACK-PAC
®
Injection Epoxy
SAFETY DATA SHEET
CRACK-PAC
®
Page 2 of 8
North America SDS
Skin Corrosion/Irritation Category 1B
Serious Eye Damage/Irritation Category 1
Sensitization, Skin Category 1
STOT, Single Exposure Category 1(corrosive to the respiratory tract)
Environmental Hazards: Acute Aquatic Environmental Hazard Category 3
Chronic Aquatic Environmental Hazard Category 3
Signal Word: DANGER!
Hazard Statements: Harmful if swallowed. Harmful in contact with skin. Harmful if inhaled. Causes severe
skin burns and eye damage. May cause an allergic skin reaction. Corrosive to the
respiratory tract. Harmful to aquatic life with long lasting effects.
Precautionary Statements:
Prevention: Wear protective gloves/protective clothing/eye protection/face protection. Contaminated
work clothing must not be allowed out of the workplace. Do not breathe vapor. Use only
outdoors or in a well-ventilated area. Do not eat, drink or smoke when using this product.
Wash thoroughly after handling. Avoid release to the environment.
Response: If swallowed: Rinse mouth. Do NOT induce vomiting. If on skin (or hair): Take off
immediately all contaminated clothing. Rinse skin with water/shower. If skin irritation or
rash occurs: Get medical advice/attention. Wash contaminated clothing before re-use. If
inhaled: Remove person to fresh air and keep comfortable for breathing. Immediately call
a poison center/doctor. If in eyes: Rinse cautiously with water for several minutes.
Remove contact lenses, if present and easy to do. Continue rinsing. Collect Spillage.
Storage: Store locked up. Store in a well-ventilated place. Keep container tightly closed. Store
between 45-90°F (7-32°C).
Disposal: Dispose of contents/container in accordance with local/regional/national regulations.
Hazards Not Otherwise Classified (HNOC)
None known.
3. Composition Information
General Information
This product is a mixture. Hazardous ingredients for each component are listed below. May include other nonhazardous
ingredients. May include other trace ingredients, see Section 15.
Resin (blue side)
Chemical Name
CAS Number
Weight %
Bisphenol A/Epichlorohydrin
25068-38-6
50-80
Hardener (clear side)
Chemical Name
CAS Number
Weight %
Benzene-1,3-dimethaneamine
1477-55-0
70-90
Diethylenetriamine
111-40-0
10-30
4. First-Aid Measures
General Information
Provide general supportive measures and treat symptomatically. Symptoms may be delayed. Ensure that medical personnel
are aware of the material(s) involved, and take precautions to protect themselves. If exposed or concerned: Get medical
advice/attention. Wash contaminated clothing before reuse.
Routes of Exposure
Eye Contact: Immediately flush eyes with plenty of cool water for at least 15 minutes while holding
the eyes open. Remove contact lenses if present and easy to do. If redness, burning,
blurred vision, or swelling persists, consult a physician.
Skin Contact: Remove contaminated clothing, immediately wash affected area with soap and water. Do
not apply greases or ointments. If skin irritation persists, consult a physician.