SDS

CRACK-PAC
®
Injection Epoxy
SAFETY DATA SHEET
CRACK-PAC
®
Page 5 of 8
North America SDS
Hazardous Reactions: Hazardous polymerization does not occur.
Decomposition Products: Carbon dioxide, carbon monoxide, oxides of nitrogen, and other organic compounds.
Hardener (clear side)
Reactivity: This product is stable and non-reactive under normal conditions.
Chemical Stability: Stable under normal storage conditions.
Condition to Avoid: High heat and open flame.
Substances to Avoid: Strong oxidizing agents. Strong acids. Epoxy resins.
Hazardous Reactions: Hazardous polymerization does not occur.
Decomposition Products: Carbon dioxide, carbon monoxide, oxides of nitrogen, and other organic compounds.
11. Toxicological Information
Likely Routes of Exposure
Ingestion: Harmful if swallowed. Causes digestive tract burns.
Inhalation: Harmful if inhaled. Causes respiratory tract burns.
Skin contact: Harmful in contact with skin. Causes severe skin burns. May cause an allergic skin
reaction.
Eye contact: Causes serious eye burns.
Information on Toxicological Effects
Acute toxicity: Occupational exposure to the substance or mixture may cause adverse effects.
Product
Species
Test Result
CRACK-PAC® Hardener (CAS mixture)
Acute, Oral, LD50
Rat
900 mg/kg
Skin corrosion/irritation: Causes skin irritation. Causes severe skin burns.
Eye damage/eye irritation: Causes serious eye irritation. Causes serious eye damage.
Respiratory sensitization: No data available.
Skin sensitization: May cause an allergic skin reaction.
Germ cell mutagenicity: No data available.
Carcinogenicity: This product is not considered a carcinogen by IARC, NTP, ACGIH, or OSHA.
Reproductive toxicity: No data available.
Aspiration hazard: No data available.
Specific target organ toxicity:
Single exposure Corrosive to the respiratory tract.
Repeated exposure No data available.
Further Information
Toxicological, ecotoxicological, physical, and chemical properties may not have been fully investigated. Hazard data above is
estimated based on best available information. Some workers with pre-existing medical conditions such as: asthma, allergies,
or impaired pulmonary and/or liver functions, or who may be particularly susceptible to this material, may be affected by
exposure to this material.
12. Ecological Information
General Information
Information given is based on data on the components and the ecotoxicology of similar products. Resin is classified as toxic
to aquatic life with long lasting effects. Hardener is classified as harmful to aquatic life with long lasting effects. Avoid
release to the environment.
Supporting Data
Persistence and degradability: This product is not expected to be readily biodegradable.
Bioaccumulative potential: No data available for this product.
Component
Species
Test Result
Bisphenol-A/Epichlorohydrin (25068-38-6)
Fish, LC50
Salmo Gairdneri
1.5 mg/l, 96 hours
Aquatic, Crustacea, EC50
Daphnia Magna
2.7 mg/l, 48 hours
Benzene-1,3-dimethaneamine (CAS 1477-55-0)
Aquatic, Crustacea, EC50
Daphnia Magna
15.2 mg/l, 48 hours