Specification
C-C-2015 © 2015 SIMPSON STRONG-TIE COMPANY INC. PRINTED 12/14
85
Solid Sawn Joist Hangers
TOP FLANGE HANGERS JB/JBA/LB/LBAZ/BA/B/HHB
Joist, Beam and Purlin Hangers
Solid Sawn Joist Hangers
B Series With Various Header Applications
1. Uplift loads are based on DF/SP lumber and have been increased for wind or earthquake
loading with no further increase allowed. Reduce where other loads govern.
2. For SPF use 0.86 x DF/SP uplift load.
3. Where noted for single-ply joist hangers use 6-10dx1
1
⁄
2
" nails.
4. NAILS: 16d = 0.162" dia. x 3
1
⁄
2
" long, 10d = 0.148" dia. x 3" long, 10dx1
1
⁄
2
= 0.148" dia. x 1
1
⁄
2
" long.
See pages 22-23 for other nail sizes and information.
See dimensions, material, loads on table pages.
HUSTF has the double shear nailing advantage—
distributing the joist load through two points on each
nail for greater strength.
FINISH: Galvanized. See Corrosion Information,
pages 13-15.
INSTALLATION:
• Use all specified fasteners. See General Notes.
• Not acceptable for nailer or welded applications;
see W and B hangers.
• HUTF—The minimum header or ledger size
that can be used with this hanger is 3
1
⁄
2
".
• HUSTF—With 3x carrying members, use
16dx2
1
⁄
2
" nails into the header and 16d
commons into the joist.
OPTIONS:
• HUTF rough beam sizes are available by
special order.
• See Hanger Options on pages 233-243 for
slope and/or skewed hangers.
• Available with flanges turned in (2-2x and
4x only for HUSCTF. 2
9
⁄
16
" or greater
for HUCTF).
Nailer application is NOT
acceptable. Fasteners
cannot be installed
Typical HUTF
Installation
HUCTF
HUSTF
Some model
configurations may
differ from those
shown. Production
models have projected
seats. Square cut seats
may be ordered.
Contact Simpson
Strong-Tie for details.
Double Shear
Nailing Top View
HU410TF
HUTF/HUSTF
Heavy Duty and Double Shear Joist Hangers
Joist or
Purlin
Size
Model
No.
Ga
Dimensions Fasteners Allowable Loads by Header Type and Fastener
Code
Ref.
W H B TF Header Joist
Uplift
(160)
LVL PSL DF/SP SPF/HF
2x
JB26
18 1
9
⁄
16
see
pages
87-89
1
1
⁄
2
1
5
⁄
16
4-10d 2-prong — — — 1040 815
I10,
L11, F16
JB28 1
1
⁄
2
1
5
⁄
16
4-10d 2-prong — — — 1050 820
JB210A
JB212A
JB214A
2 1
7
⁄
16
6-16d 2-10dx1
1
⁄
2
315 — — 1685 1190
160
6-10d 2-10dx1
1
⁄
2
315 — — 1015 1015
2x
LB26
14 1
9
⁄
16
see
pages
87-89
1
1
⁄
2
1
5
⁄
16
4-16d 2-10dx1
1
⁄
2
290 — — 1380 860
I10,
L11, F16
LB28 1
1
⁄
2
1
5
⁄
16
4-16d 2-10dx1
1
⁄
2
290 — — 1270 790
LB210AZ
LB212AZ
LB214AZ
2 1
7
⁄
16
6-16d 2-10dx1
1
⁄
2
380 — — 1865 1330
170
6-10d 2-10dx1
1
⁄
2
380 — — 1220 1220
4x
BA Min.
14 3
9
⁄
16
see
pages
87-89
3 1
7
⁄
16
16-16d 2-10dx1
1
⁄
2
265 3230 3630 3080 2425
I19,
L14, F21
16-10d 2-10dx1
1
⁄
2
265 4015 3705 3435 2665
BA Max.
16-16d 2-10dx1
1
⁄
2
1170 3555 3630 3625 2465
16-10d 2-10dx1
1
⁄
2
1170 4715 4320 3800 2665
3x, 4x B 12
see
pages
87-89
see
pages
87-89
2
1
⁄
2
2
1
⁄
2
14-16d 6-10dx1
1
⁄
2
990 3575 3195 3625 2190
14-10d 6-10dx1
1
⁄
2
990 4135 3355 3800 2650
page