Project Ideas

67
Customized Connectors
It’s easy to add a unique dimension to your projects with
just a splash of color on the connectors.
1. Use a rag and mineral spirits to remove oil and the bar code sticker from
the connector.
2. Apply white vinegar with a rag or sponge to make the connector more
receptive to paint. Rinse with water and dry thoroughly.
3. Use spray paint to coat the connectors.* Choose a paint appropriate for
outdoor or indoor use. To avoid drip marks, apply successive thin coats
rather than a single heavy coat. Dry between coats.
*If paint doesn’t have primer, you’ll need to prime the connector.