Installation Guide

11
Some connectors install with the
Simpson Strong-Tie
®
Strong-Drive
®
¼ " SDS HEAVY-DUTY CONNECTOR screw.
1. Install with
 " hex socket or
nut driver
2. Pre-drilling generally not required
3. Do not substitute with lag screws
Algunos conectores se instalan con
el Simpson Strong-Tie
®
Strong-Drive
®
¼ " SDS HEAVY-DUTY CONNECTOR screw.
Machine Bolt
Diameter: ½" , " , ¾" , " , 1 "
Pernos
Diametro: ½" , " , ¾" , " , 1 "
1. Instalar con un destornillador de casquillo
hexagonal o de tuercas de  "
2. Generalmente no es necesario efectuar
perforaciones previas
3. No sustituir con tirafondos
Fasteners/Clavos
SDS25412
SDS25312
SDS25300
SDS25212
SDS25200
SDS25112
TITEN
®
Masonry Screw
Diameter: ⁄" , ¼"
Tornillo Para Mampostería
Diametro: 3/16" , ¼"