MSDS

ManualsBrandsSimpson Strong-Tie ManualsPaint8.5 oz. Epoxy-Tie Cartridge

SET-XP

High-Strength Anchoring Adhesive for Cracked and Uncracked Concrete

MATERIAL SAFETY DATA SHEET

SET-XP

Resin Page 1 of 6

I. PRODUCT AND COMPANY IDENTIFICATION

Company: Simpson Strong-Tie Company, Inc.

Address: 5956 W. Las Positas Blvd.

Pleasanton, CA 94588

Product Name: Cartridges: SET-XP10, SET-XP22, SET-XP56, SET-XP650

Single Packaging – SET-XP10KT: SETXP050R

SETXPR

Product Description: High-Strength Anchoring Adhesive for Cracked and Uncracked Concrete –

Epoxy Resin

Emergency Contact No.: 1-800-535-5053 USA

1-352-323-3500 International

Date Prepared or Revised: August 2012

Supercedes: March 2012

For most current MSDS, please visit our website at www.strongtie.com

II. COMPOSITION / INFORMATION ON INGREDIENTS

Chemical Names

CAS Numbers

BisPhenolA/Epichlorohydrin (Epoxy Resin)

25068-38-6

N-butyl glycidyl ether

2426-08-06

Silica, crystalline quartz

14808-60-7

Titanium dioxide

1317-80-2

The remaining ingredients are designated as “trade secret”.

III. HAZARD IDENTIFICATION

EMERGENCY OVERVIEW

Non-corrosive.

May cause eye and skin irritation.

May cause skin sensitization.

POTENTIAL HEALTH EFFECTS

ACUTE

Eye Contact: May cause eye irritation, swelling, tearing, redness or cornea damage.

Skin Contact: Moderate irritation. May cause skin sensitization, evidenced by rashes and hives.

Inhalation: Moderate irritation to the nose and respiratory tract. May cause Central Nervous System

depression, evidenced by headache, dizziness, and nausea.

Ingestion: May cause irritation to the gastrointestinal tract. May cause Central Nervous System

depression or other systemic effects.

Systemic Effects: Lungs, eyes, and skin.

IV. FIRST AID MEASURES

Eye Contact: Immediately flush eyes with plenty of cool water for at least 15 minutes while holding

the eyes open. If redness, burning, blurred vision, or swelling persists, CONSULT A

PHYSICIAN.

Skin Contact: Remove product and immediately wash affected area with soap and water. Do not

apply greases or ointments. Remove contaminated clothing. Wash clothing with

soap and water before reuse. If redness, burning, or swelling persists, CONSULT A

PHYSICIAN.

Ingestion: DO NOT INDUCE VOMITING. Never administer anything by mouth to an

unconscious person. Rinse out mouth with water, then drink sips of water to remove

taste from mouth. CONSULT A PHYSICIAN if vomiting occurs spontaneously, keep

head below hips to prevent aspiration.

Inhalation: Remove patient to fresh air. If patient continues to experience difficulty breathing,

CONSULT A PHYSICIAN.

Summary of content (6 pages)

PAGE 1
SET-XP® High-Strength Anchoring Adhesive for Cracked and Uncracked Concrete MATERIAL SAFETY DATA SHEET I. PRODUCT AND COMPANY IDENTIFICATION Company: Address: Simpson Strong-Tie Company, Inc. 5956 W. Las Positas Blvd. Pleasanton, CA 94588 Product Name: Cartridges: SET-XP10, SET-XP22, SET-XP56, SET-XP650 Single Packaging – SET-XP10KT: SETXP050R SETXPR High-Strength Anchoring Adhesive for Cracked and Uncracked Concrete – Epoxy Resin Product Description: Emergency Contact No.
PAGE 2
SET-XP® High-Strength Anchoring Adhesive for Cracked and Uncracked Concrete MATERIAL SAFETY DATA SHEET V. FIRE-FIGHTING MEASURES Suitable Extinguishing Media: Fire And Explosion Hazard: Fire Fighting Equipment and Procedures: Water fog, carbon dioxide or dry chemical, aqueous foam. Hazardous decomposition products may occur when materials polymerize at temperatures above 500oF. Do not allow run-off from fire fighting to enter drains or water courses.
PAGE 3
SET-XP® High-Strength Anchoring Adhesive for Cracked and Uncracked Concrete MATERIAL SAFETY DATA SHEET Materials To Avoid: Oxidizing agents, acids, organic bases, and amines. Hazardous Decomposition Products: Combustion may produce carbon monoxide, carbon dioxide, aldehydes, acids and other organic substances. Hazardous Polymerization: Will not occur. XI.
PAGE 4
SET-XP® High-Strength Anchoring Adhesive for Cracked and Uncracked Concrete MATERIAL SAFETY DATA SHEET I. PRODUCT AND COMPANY IDENTIFICATION Company: Simpson Strong-Tie Company, Inc. Address: 5956 W. Las Positas Blvd. Pleasanton, CA 94588 Product Name: Product Description: Emergency Contact No.
PAGE 5
SET-XP® High-Strength Anchoring Adhesive for Cracked and Uncracked Concrete MATERIAL SAFETY DATA SHEET V. FIRE-FIGHTING MEASURES Suitable Extinguishing Media: Fire And Explosion Hazard: Fire Fighting Equipment and Procedures: Water spray, fog or foam, carbon dioxide, dry chemical, limestone powder. Irritating and toxic fumes may be produced at high temperature. In a fire, may produce carbon monoxide, toxic nitrogen oxide, ammonia, and carbon dioxide.
PAGE 6
SET-XP® High-Strength Anchoring Adhesive for Cracked and Uncracked Concrete MATERIAL SAFETY DATA SHEET X. REACTIVITY DATA Stability: Conditions To Avoid: Materials To Avoid: Hazardous Decomposition Products: Hazardous Polymerization: Stable under normal storage conditions. Incompatible chemicals, high heat, and open flame. Oxidizing agents and acids. Combustion may produce carbon monoxide, carbon dioxide, and nitrogen oxide, and other organic substances. Will not occur. XI.