Warranty

ManualsBrandsSimpson Strong-Tie ManualsOther2-1/2 in. Lobed Pan-Head Stainless Steel Composite Screw (8-Pack)

Simpson Strong-Tie

Fastening Systems

Important Information Warnings and Warranties

Warning

SimpsonStrong-Tie

fasteners and fastening products

are designed and tested for certain applications and

environments. To obtain optimal performance from

SimpsonStrong-Tie products, the products must be

properly installed and used in accordance with the

installation instructions and design limits provided by

SimpsonStrong-Tie CompanyInc.

To ensure proper installation and use, designers and

installers must carefully read the following General

Notes, catalog pages for speciﬁc product installation

and instructions and notes.

Proper product installation requires careful attention

to all notes and instructions. Installers, designers,

engineers and consumers should consult the

Simpson Strong-Tie Company Inc. website

at www.strongtie.com to obtain additional design

and installation information, including:

• Information on workshops SimpsonStrong-Tie conducts

at various training centers throughout the country

• Code Reports

• Technical ﬂiers and bulletins

• Corrosion information

• Answers to frequently asked questions and technical topics

Failure to follow fully all of the notes and instructions

provided by SimpsonStrong-Tie CompanyInc. may

result in improper installation of products. Improperly

installed products may not perform to the speciﬁcations

set forth in this catalog.

SimpsonStrong-Tie CompanyInc. does not guarantee

the performance or safety of products that are modiﬁed,

improperly installed or not used in accordance with the

design and load limits set forth in this catalog.

Terms & Conditions of Sale

Product Use

Products in this catalog are designed and manufactured

for the speciﬁc purposes shown, and should not be

used for any other purposes unless approved by

a qualified Designer. Modifications to products or

changes in installation procedures should only be

made by a qualiﬁed Designer. The performance of such

modiﬁed products or altered installation procedures is

the sole responsibility of the Designer.

Indemnity

Customer or Designers modifying products or

installation procedures, or designing non-catalog

products for fabrication by SimpsonStrong-Tie

CompanyInc. shall, regardless of speciﬁc instructions

to the user, indemnify, defend, and hold harmless

SimpsonStrong-Tie CompanyInc. for any and all

claimed loss or damage occasioned in whole or in part

by non-catalog or modiﬁed products.

Non-Catalog and Modiﬁed Products

Consult SimpsonStrong-Tie CompanyInc. for

applications for which there is no catalog product or for

fasteners for use in applications not speciﬁcally listed

for the product.

Non-catalog products must be designed by the

customer and will be supplied by SimpsonStrong-Tie

CompanyInc. in accordance with customer

speciﬁcations.

SimpsonStrong-Tie CompanyInc. cannot and does

not make any representations regarding the suitability of

use or load-carrying capacities of non-catalog products.

SimpsonStrong-Tie CompanyInc. provides no

warranty, express or implied, on non-catalog products.

F.O.B. shipping point unless otherwise speciﬁed.

Limited Warranty

This Limited Warranty must be read in conjunction with

the General Notes, Corrosion Information, and Terms &

Conditions of Sale.

SimpsonStrong-Tie Co. Inc. (“Simpson”) warrants

catalog products to be free from defects in material or

manufacturing. Simpson products are further warranted

for adequacy of design when used in accordance with

design limits in this catalog, and properly speciﬁed and

installed. This warranty does not apply to products

used not in compliance with speciﬁc applications and

installation procedures set forth in this catalog, or to

non-catalog or modiﬁed products, or to deterioration

due to environmental conditions.

Simpson products are designed to the load capacities

and uses listed in this catalog. Properly installed

Simpson products will perform in accordance

with the specifications set forth in the applicable

SimpsonStrong-Tie

catalog. Additional performance

limitations for speciﬁc products may be listed on the

applicable catalog pages.

Due to the particular characteristics of potential impact

events, the speciﬁc design and location of the structure,

the building materials used, the quality of construction,

and the condition of the soils involved, damage may

nonetheless result to a structure and its contents even

if the loads resulting from the impact event do not

Simpson Strong-Tie

Fastening Systems

Important Information

Warnings and Warranties

Summary of content (3 pages)

PAGE 1
Simpson Strong-Tie® Fastening Systems Important Information Warnings and Warranties Warning Simpson Strong‑Tie® fasteners and fastening products are designed and tested for certain applications and environments. To obtain optimal performance from Simpson Strong‑Tie products, the products must be properly installed and used in accordance with the installation instructions and design limits provided by Simpson Strong‑Tie Company Inc.
PAGE 2
Simpson Strong-Tie® Fastening Systems Warranties (cont.) and General Notes exceed Simpson Strong‑Tie catalog specifications and Simpson Strong‑Tie® products are properly installed in accordance with applicable building codes. All warranty obligations of Simpson shall be limited, at the discretion of Simpson to repair or replacement of the defective part(s). These remedies shall constitute Simpson’s sole obligation and sole remedy of purchaser under this warranty.
PAGE 3
Simpson Strong-Tie® Fastening Systems Important Information and General Notes x. Only use fasteners for their intended purpose as described in this publication. Connection failures can result from inappropriate substitution. y. Be aware of special conditions that may increase corrosion risk and select product accordingly. z. Test drive fasteners to assure fasteners install correctly. aa. W ith the use of any power or pneumatic tools, follow manufacturer’s safety instructions. ab.