Replacement Part List

9 - ENG
4
Connect Spray
Wand to Spray
Gun
Thread the spray wand into
the end of the spray gun.
5
Connect QC
Nozzles to Spray
Wand
Pull quick connect
coupler back and insert
nozzle. Release quick
connect coupler and
twist nozzle to make sure
it is secure in coupler.
6
Turn Water
Faucet
Completely On
Do not run the unit
without water supply
connected and turned on.
Use Cold Water Only.
7
Release Air from
System
Release all air from
pump and high pressure
hose by depressing
trigger until a steady
stream of water is present.
Approximately 30 seconds.
30 S
8
Verify the Fuel
Switch is turned
to the ON
Position
9
Verify the Engine
Switch is turned
to the ON
Position
OFF
ON
10
Move the Choke
to the CLOSED
Position
11
Pull the Recoil
Starter Grip
Pull the
recoil starter grip to
start the engine.
12
Move the Choke
to the OPEN
Position
Gradually move the Choke
to the OPEN Position
after engine starts.
WARNING: This Guide is not a substitute for reading the operator's manual. User must
read and understand operator's manual before using this product.