User Manual
6
www.electrolux.com
USE3.
3.1 The Control Panel
1
2
3
This button allows you to start or
pause the dryer to check the
contents or perhaps add more
clothes.
NOTES : The dryer will not start
unless the door is closed.
(If door is not closed you
will hear 6 beeps followed by
DRY LED blinking 4 times.)
If selector knob is turned while
dryer is running or paused
mid cycle 3 beeps is heard to
indicate operation is not allowed.
Cycle will not continue if selector
knob is not returned to original
selected program.
3
START/PAUSE BUTTON
2
INDICATORS
Turn the Program Selector knob to
choose a drying program.
The table “Program Guide”
shown on page 7 will help
you in selecting the right program.
NOTES : The Program Selector knob
is not a timer. Once you select a
drying program, the Program Selector
knob will stay at that position for
the whole drying cycle.
1
PROGRAM SELECTOR KNOB
STATES STATUS INDICATOR
Initial Power on.
• After appliance is powered on.
•
Allows user to select a drying
program
• Dry LED blinks
• End LED Off
Machine Switched Off • All LED Off
Drying Phase
• Drying cycle starts.
•
•
Buzzer will sound after main
drying and cooling phases
ends, at the start of
anticrease.
Anticrease in progress
Drying & Cooling
• Dry LED On
• End LED Off
Anticrease
• Dry LED Off
• End LED blinks
Paused
• Drying cycle paused
• Cannot change drying program
• Dry LED blinks
End LED Off
End State
•
•
Drying cycle and
See description on page 10
Anticrease completed
• Dry LED Off
• End LED Off
Alarm/ Error • Dry LED blinks
• End LED blinks