EN User Manual Dishwasher SSF6105W SSF6105X
Contents Safety information Safety instructions Control panel Programs Before first use Daily use 2 3 4 5 6 6 Hints and tips Care and cleaning Troubleshooting Technical information Warranty 9 10 11 12 12 Subject to change without notice. Safety information Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages.
• • • • • • • • • If the supply cord is damaged, it must be replaced by the manufacturer, its Authorised Service Centre or a similarly qualified persons in order to avoid a hazard. Put knives and cutlery with sharp points in the cutlery basket with the points down or in a horizontal position. Do not keep the appliance door open without supervision to prevent to fall on it. Before maintenance, deactivate the appliance and disconnect the mains plug from the mains socket.
• • • • Do not drink and play with the water in the appliance. Do not remove the dishes from the appliance until the programme is completed. There can be detergent on the dishes. The appliance can release hot steam if you open the door while a programme operates. Do not put flammable products or items that are wet with flammable products in, near or on the appliance. Service • Contact the Authorised Service Centre to repair the appliance. We recommend only the use of original spare parts.
Indicator Description Rinse aid indicator. It is always off while the program operates. Half Load indicator. Programs Program Degree of soil Type of load Program phases Consumption values 1) Duration (min) Energy (kWh) Water (l) Normal soil Crockery and cutlery • • • • Prewash Wash 50 °C Rinses Dry 128 0.75 11.7 Normal soil Crockery and cutlery • • • • Prewash Wash 65 °C Rinses Dry 100 - 120 1.2 - 1.
Before first use 1. 2. 3. Fill the rinse aid dispenser. Open the water tap. Start a program to remove any processing residuals that can still be inside the appliance. Do not use detergent and do not load the baskets. Adding rinse aid 1 43 21 2 The rinse aid helps to dry the dishes without streaks and stains. It is automatically released during the hot rinse phase. Daily use 1. 2. Open the water tap. Set the correct program for the type of load and the degree of soil.
Adding multi-tablets A B 30 30 20 • 20 Set the rinse aid dispenser to the lowest position. Program selection mode The appliance must be in Program selection mode to start a program. If the control panel does not show this condition, use the Reset function. Reset With Reset you can cancel the running program . The appliance goes back to the Program selection mode.
Open the water tap, close the door, select a program, press . Option Half load 1. Set the program. 2. Press 3. Press the related indicator comes on. to start the program. This option is available with , and . With this option you can wash a small load of tableware and cookware. The option decreases the program duration and the consumption of water and energy. Load both baskets and use less quantity of detergent.
At the end of the program 5 min The indicator comes on. If you do not deactivate the appliance within 5 minutes all indicators goes off. This helps to decrease energy consumption. Turn the knob to . Close the tap. Hints and tips General Using rinse aid and detergent The following hints will ensure optimal cleaning and drying results in daily use and also help to protect the environment. • • • • • • • Remove larger residues of food from the dishes into the waste bin.
Loading the baskets • Only use the appliance to wash items that are dishwasher-safe. Do not put in the appliance items made of wood, horn, aluminium, pewter and copper. Do not put in the appliance items that can absorb water (sponges, household cloths). Remove remaining food from the items. Make soft the remaining burned food on the items. Put hollow items (cups, glasses and pans) with the opening down. Make sure that cutlery and dishes do not bond together. Mix spoons with other cutlery.
• Put back the filter (A) in the flat filter (C). Turn it clockwise until it locks. An incorrect position of the filters can cause bad washing results and damage to the appliance Cleaning the spray arms Internal cleaning Do not remove the spray arms. If the holes in the spray arms are clogged, remove remaining parts of soil with a thin pointed object. • External cleaning • • • Clean the appliance with a moist soft cloth. Only use neutral detergents.
The washing and drying results are not satisfactory Problem Possible solution There are whitish streaks or bluish layers on glasses and dishes. • There are stains and dry water drops on glasses and dishes. • • • • The dishes are wet. • • The release quantity of rinse aid is too much. Adjust the rinse aid selector to a lower position. The quantity of detergent is too much. The released quantity of rinse aid is not sufficient. Adjust the rinse aid selector to a higher position.
APPLIANCE: SIMPSON DISHWASHER This document sets out the terms and conditions of the product warranties for Electrolux Appliances. It is an important document. Please keep it with your proof of purchase documents in a safe place for future reference should you require service for your Appliance. 1. 2. 3. 4. 5.
replacement or refund will apply if an Appliance has a valid warranty claim applicable to it. 11. For Appliances and services provided by Electrolux in New Zealand, the Appliances come with a guarantee by Electrolux pursuant to the provisions of the Consumer Guarantees Act, the Sale of Goods Act and the Fair Trading Act. 12.
www.simpson.co.
