Technical data

Installation 29
INSTALLATION11 .
11.1 Unpacking
You are advised to keep all transit
devices so that they can be
refitted if the machine ever has to
be transported again.
Use gloves. Remove the external
film. If necessary, use a cutter.
Remove the polystyrene packaging
materials.
Remove the plastic bag which
cover the machine.
Open the door. Remove all the items
from the drum.
All transit bolts and packing must
be removed before using the
appliance.
CAUTION!
1.
2.
Remove the cardboard top.
3.
4.
5.
6.
7.
Remove the polystyrene base.
8.
Put one of the polystyrene
packaging elements on the floor
behind the appliance. Carefully
put down the appliance with the
rear side on it. Make sure not to
damage the hoses.
Pull up the appliance in vertical
position.
9.
Remove the power supply cable
and the drain and inlet hoses from
the hose holders (A) on the rear of
the appliance.
1
2