Technical data

Daily Use 15
If the door lock indicator does not
disappear, this means that the
machine is already heating and the
water level is above the bottom edge
of the door or the drum is turning. In
this case the door CAN NOT be
opened.
If you can not open the door but
you need to open it you have to
switch the machine off by turn the
program selector knob to the
position ‘ ’ to deactivate the
appliance. After about 5 minutes the
door can be opened.
Pay attention to the water
level and water tempera-
ture.
CAUTION!
5.6 At The End Of The Program
1.
3.
2.
When The Washing Program
Is Completed, But There Is
Water In The Drum
The drum turns regularly to
prevent the creases in the
laundry.
You must drain the water to open
the door.
The ‘Door Lock’ indicator is on.
The door stays locked.
To drain the water:
Press the button Start/Pause.
The appliance will drain the
water.
If necessary, decrease the spin
speed.
Set the “Spin” or “Drain” program.
-
-
5.7
When the program is completed
and the Door Lock indicator
disappears, you can open the
door.
4.
Turn the program selector knob
to the position ‘ ’ to deactivate
the appliance.
5.
5 minutes after the washing program
ends, if you do not deactivate the
appliance, the energy saving function
activates.
The energy saving function decreases
the energy consumption when the
appliance is in the stand by mode.
All indicators and the display will
switch off.
The indicator of the Start/Pause
button will flash slowly.
Press one of the buttons to
deactivate the energy saving
status.
Stand by mode
5.8
The appliance stops automatically.
The acoustic signal will operate.
The display will show ‘ ’.
The indicator of the Start/Pause
button goes off.
-
-
-
-
-
-
-
-
The door lock indicator goes off.
Remove the laundry from the
appliance. Make sure that the
drum is empty.
Keep the door ajar, to prevent
the mildew and odours.
Turn off the water tap.