Technical data

22 Care And Cleaning
3. Press the two levers and pull
forward the drainage duct to let the
water flow out.
4. When the container is full of water,
put the drainage duct back again
and empty the container. Do steps
3 and 4 again and again until no
more water flows out from the drain
pump.
5. Pull back the drainage duct and turn
the filter to remove it.
6. Remove fluff and objects from the
pump (if there are any).
7. Make sure that the impeller of the
pump can turn. If this does not
occur, contact the service centre.
1
2