Technical data

Care And Cleaning 23
If your water is very hard or contains
traces of lime deposit, the water inlet
filter may become clogged.
It is therefore a good idea to clean it
from time to time.
Remove the water inlet hose from
the water tap.
Remove the inlet hose behind the
appliance.
Clean the filter in the valve with a
stiff brush or a towel.
Install again the inlet hose. Make sure
that the couplings are tight to prevent
leakages.
Clean the filter in the inlet hose with
a stiff brush.
8.8 Cleaning The Water Inlet Filter
To clean the water inlet filters:
1.
Close the water tap.
2.
3.
4.
5.
6.
7. Open the water tap.
45°
8. Clean the filter under the water tap.
9. Put the filter back in the pump into
the special guides. Make sure that
you tighten correctly the filter to
prevent leakages.
10. Close the pump door.