Technical data

Installation 29
INSTALLATION11 .
11.1 Unpacking
You are advised to keep all transit
devices so that they can be
refitted if the machine ever has to
be transported again.
Use gloves. Remove the external
film. If necessary, use a cutter.
Remove the polystyrene packaging
materials.
Remove the plastic bag which
cover the machine.
Open the door. Remove the
polystyrene piece from the door seal
and all the items from the drum.
All transit bolts and packing must
be removed before using the
appliance.
CAUTION!
1.
2.
Remove the cardboard top.
3.
4.
5.
6.
7.
Remove the polystyrene base.
8.
Put one of the polystyrene packaging
elements on the floor behind the
appliance. Carefully put down the
appliance with the rear side on it.
Make sure not to damage the hoses.
Pull up the appliance in vertical
position.
9.
Remove the power supply cable
and the drain and inlet hoses from
the hose holders (A) on the rear of
the appliance.
1
2