Technical data
8 Control Panel
3.8 Start/Pause Button 
3.7 Display and Door Lock 
 Indicator
To start the selected program, 
press the ‘Start/Pause’.
To interrupt a program which is 
running, press the ‘Start/Pause’ to 
pause the machine.
To restart the program from the 
point at which it was interrupted, 
press the ‘Start/Pause’ again.
If you have chosen a delayed start, 
after pressing ‘Start/Pause’ the 
machine will begin the countdown.
A
Digital Number will show:
-
B
C
Child Lock Icon
Door Lock Indicator
Washing cycle time.
LED on, you cannot open the 
door.
LED off, you can open the door.
-
The alarm codes. Refer to the 
chapter “Troubleshooting” for 
their description.
-
Delay start time.
B
3.9 Delay Start Button
This option makes it possible to 
delay the start of the program by 
30 min, 60 min or 90 min and then 
by every hour from 2 to 20 hours.
The delay you have selected is 
indicated on the display. The end 
time will increase in order to show 
you the selected delay.
You must select this option after 
you have set the program and 
before you press the Start/Pause 
button.
If you wish to add laundry in the 
machine during the delay time 
press Start/Pause button to put the 
machine in PAUSE mode. Add 
laundry, close the door and press 
Start/Pause button again.
You can cancel the delay time at 
any moment, by pressing ‘Delay 
Start’ button repeatedly till the 
display shows delay time ‘ ’, then 
press the Start/Pause button.
3.10 Child Lock Option
Your appliance is provided with 
CHILD SAFETY LOCK which 
permits you to leave the appliance 
unsupervised with the door closed 
without having to worry that 
children might be injured by or 
cause damage to the appliance.
Set this option before pressing the 
Start/Pause and after having 
selected the required wash program.
This function remains enabled even 
after the appliance is switched off.
To activate the function, press 
‘Temp’ and ‘Spin’ buttons at 
the same time until indicator of 
this option comes on.
Setting Child Lock option:
To deactivate the function, press 
‘Temp’ and ‘Spin’ buttons at the 
same time until indicator of this 
option goes off.
CA










