Installation manual

Simrad 50-7

Observe the horizontal and vertical distances (X and Y) between

the keel and the transducer blister. On a medium sized vessel, the

horizontal distance (X) should be approximately 1 meter. The

vertical distance (Y) must in general be as small a s possible. This

is important to prevent the keel from shadowing t he transducer

beam in shallow waters.

(CD17010D)

(A) = Keel

(B) = Transducer blister

(X) = Horizontal distance between keel and blister

(Y) = Vertical distance between the blister surface and the keel

305270/A