Installation manual
Introduction
INTRODUCTION
The purpose of this manual is the provide the basic information
required to install the 50-7 Single beam transducer.
Note that although drawings are provided to explain the
installation principles, the installation shipyard must provide the
final drawings required to fit each individual vessel. Also, when
applicable, t he installation shipyard must have the d rawings and
installation approved by the proper authorities.
Transducer order number: KSV-203665.
A cable gland kit for steel hull is included with the delivery.
Other cable glands must be ordered separately.
Transducer installation
The next c hapter in this manual provides general guidelines
for transducer installation. The drawings specific for the 50-7
transducer are l ocated in the Drawing fi le.
Technical specifications
Refer to the 50-7 Product specification.
Additional parts
The following items can be supplied by Simrad to facilitate
installation:
• Mounting ring: Order number 499–203336
• Transducer cable (for extension): Order number 642–016604
305270/A 5