Installation manual

| 11
Installation and wiring | AC12N/AC42N Autopilot Computers
¼ Note: Do not connect the power cable to the same terminals as the
autopilot computer, pulse radar, bow thruster or other high current
devices - the network may be affected by voltage drop when these
devices are operated. Avoid connection to the engine starting
batteries, where possible.
Autopilot control units
3 3
1 1
4 4
2
1. NMEA 2000 drop cable, male-female Micro-C plugs
2. SimNet to Micro-C (male) adapter cable (part no. 24005729)
3. NMEA 2000 backbone
4. Micro-C T-connectors
¼ Note: For more details, refer to the Autopilot Control unit’s
documentation.