Installation manual

| 3
System description | AC12N/AC42N Autopilot Computers
System description
General
The autopilot computer is a navigational data processing unit
and contains the steering computer and electronics for the drive
unit motor and clutch and provides an interface to other system
components. Two models, AC12N (8 A continuous / 16 A peak
motor current) and AC42N (30 A continuous / 50 A peak motor
current) are available.
It communicates on the NMEA 2000 data and control network to
establish a reliable digital communication and power distribution
between the units in the autopilot system as well as other NMEA
2000 compatible products.
How to use this manual
This manual is intended as a reference guide for installing the
AC12N and AC42N autopilot computers and other components in
an autopilot system.
Please take time to read this manual to get a thorough
understanding of the system components and their relationship to
a complete autopilot system.
The autopilot system includes and Operator manual. Refer to this
manual for commissioning and seatrial of your autopilot system.
1