Installation manual
| 5
Installation and wiring | AC12N/AC42N Autopilot Computers
Determine system conguration
It is important to become familiar with the configuration of the
system prior to beginning the installation. An example of a system
featuring this autopilot computer is shown on the next page.
Plan your cabling and configure the NMEA 2000 network in
accordance with the section on page 9. Pay particular attention to
the autopilot computer/drive unit combinations.
As most of the units are communicating on a common network
(NMEA 2000) with identical connectors, the installation is simple.
Try to mount the units within the standard cable length supplied
with each unit. Compatible drop, extension or converter cables
should be available from your distributor.