System information

80 | Setup at installation
The Automatic tuning function will take control of the
boat and perform a number of S-turns. It must always be
performed in open waters at a safe distance from other
traffic. The Automatic tuning function may take from 1 to
2 minutes to complete. To stop the Autotune, press the
STBY key.
1
Activate the Autotune by pressing the
softkey.
After an Autotune, there should be no need for further
adjustments. Fine tuning of these parameters are made
by the response control (see page
14). However, viewing
or changing the parameters can be made in AUTO mode
by entering ‘Installation’ in the Main menu. See also
“Recall Autotuned” below.
Status
The Status screen shows a list of installation items to be
done and installation items completed.
1
Return to the Installation menu item ‘Automatic steering’
if you want to adjust the steering parameters. See below
for information.
Automatic steering
The Automatic steering menu contains steering
parameters for course steering, wind steering and nav
steering.