Installation manual

Installation
20222469 / B 5
Pay particular attention to the junction unit/drive unit
combinations on page 21 and the cable length and number of
Robnet units on page 27. Also refer to Junction Units in the
AP50 Operator manual.
As many of the units are communicating on a common network
(Robnet) with identical connectors, the installation is simplified.
Mount the units within the standard cable length supplied with
each unit, if possible (refer to Technical Specifications, section
4, beginning on page 91. Robnet Extension Cable (10m) is
available from your Simrad distributor. Refer to the Spare Parts
List on page 91 for part numbers.
2.5 AP50 System Layout
QS50
GYROCOMPASS
FU50
BOAT'S
MAGNETIC
COMPASS
NI300X
GPS/
CHART
PLOTTER
NON
SIMRAD
COMPASS
RC25
RADAR CLK/DATA
2-WIRE FREQ.
ROBNET
TI51
J50/
J50-40
RF300
R3000X
GI51
2-WIRE FREQ.
MAINS
3- or 4-WIRE
ELECTRONIC
CHART
SYSTEM
WINDVANE
HS5X
SOLENOID
VALVE
RF45X
JS10
AP51
AP50
CDI35
NMEA DATA
EXT. ALARM
CD100A
AP50
S35
REVERSIBLE
PUMP
RI35 MK2
AD50
RF14XU
RI9
RFC35
PANORAMA
MK2
S9
Figure 2-1 AP50 Extended system with options
Note ! The extended system layout does not show all possible layouts.