Operation Manual

|
15
Connect the Broadband radar to your display | Broadband 3G/4G™ Radar Installation Guide
Lowrance HDS outside USA or with MARPA / chart overlay
Simrad NSS
(NMEA2000 network)
The 3G and 4G radar connects to the Lowrance HDS and Simrad NSS in the same manner
+
_
FUSE
FUSE
FUSE
Parts required for chart overlay / MARPA
1
2
3
4
5
6
7
9
9
10
8
NMEA2000 Network
NMEA2000
Ethernet
Power
Lowrance HDS
or
Simrad NSS
1. Lowrance HDS or Simrad NSS
2. Broadband 3G™ or 4G™ Radar
3. Interconnection cable (Lowrance 10 m (33 ft) Simrad 20 m (65.5 ft))
4. RI10 Radar interface box
5. Ethernet cable (1.8 m (6 ft)). The RI10 can connect either directly to a Multifunction display
or via an Ethernet switch (NEP-2), or a free port on an LSS-1 Structure scan module. For cable
options see “Ethernet cables” on page 28
6. NEP-2 Network Expansion Port. 5 Port Ethernet switch
The following Parts required for MARPA and / or chart overlay:
7. RC42 Heading Sensor
8. SimNet cable. For cable options see “SimNet cables” on
page 28
9. SimNet - NMEA2000 adapter kit: a) SimNet -Micro-C cable
0.5 m (1.6 ft), b) SimNet joiner. c) NMEA2000 T-Connector
HDS
NSS
NMEA2000
Ethernet
a b c
RADAR_3G_4G_IG_988-10113-003_EN_P.indd 15 2/11/2011 6:08:51 p.m.