Operator`s manual

Engine status setup
Left engine source: ENGINE 1
Right engine source: ENGINE 2
Engine RPM range: 5000RPM
Engine RPM limit: 04200RPM
Oil pressure range: 100Psi
Turbo pressure range: 050Psi
Engine coolant temp. range: 120°C
MENU
Exit Accept
ENT
∆
∆
Chapter 7-4 Engine monitoring
Engine RPM limit, default is 4200 RPM. To control the limit manu-
ally, you can insert a new limit by means of the numerical keys.
When the limit is exceeded, the green fill color will turn red.
Oil pressure range, default is 100 Psi. Use numerical keys to enter
new range. Can be shown in Psi (10-125 Psi) or Pascal (69-862 kPa).
Turbo pressure range, default is 50 Psi. Use numerical keys to enter
new range. Can be shown in Psi (10-125 Psi) or Pascal (69-862 kPa).
Engine coolant temperature range, default is 120 degrees Celcius.
Use numerical keys to enter new range. Can be shown in Celcius
(40°C to 200°C) or Fahrenheit (104°F to 392°F).
ENT
Confirm entry or exit with [MENU] without making any changes
7.2 Fuel and transmission
The level of fuel is indicated in a percentage of the maximum value,
depending on the shape of the fuel tank and the level sensor. This
level can either be ‘level above tank bottom’ or ‘remaining volume in
tank’. The fill color will be red when reaching < 10 %.
MENU
Call up the menu bar, and...
5,2
load the Fuel and transmission display
- see display example next page.