Operator`s manual

Waypoint / route menu Chapter 9-21
9.11 Data transfer via PC interface
Data transfer to and from a route planning program on a Personal
Computer can be made via NMEA connection (Refer to Optional
connections in the Installation manual) by means of the standard
NMEA0183 sentences WPL and RTE.
 The data transfer on these two sentences does not include WP sym-
bol, color, XTE limit, etc.
 PC-based planning systems differ in operation and performance
beyond the control of Simrad.
MENU
Call up the menu bar, and...
7,8
load the Data transfer window
Data transfer
1
DataCard upper drawer - see section 9.9
3
DataCard lower drawer - see section 9.9
5
PC-Planner - see section 9.10
7
NMEA connection
MENU
Exit
7
Select the NMEA connection
CX44/54 example:
WARNING!
The normal communica-
tion via this NMEA port
is temporarily inter-
rupted during the time
of data transfer.
Normal NMEA communication on
selected channel will be
interrupted.
1
NMEA 1
3
NMEA 2
MENU
Exit
Press [1] or [3] to select the NMEA port where the PC data cable is
connected. This will activate a new window, see next page.