Operator`s manual

Setup menu Chapter 10-11
Setup for speed:
Speed alarm maximum (SOG):000.0kn OFF
Speed alarm minimum (SOG):000.0kn OFF
The display
example
sections are
for:
CX34/44/54
Setup for units:
Depth/altitude in: METERS
Distance in: NAUTICAL MILES
Speed in: KNOTS
Temperature in: DEGREE CELCIUS
Pressure in: PSI
Volume in: LITER
Software version: CX34 4.00
Serial number: 0x003d69ab
Interface software version: 1.19
GPS receiver type: N11999
PAGE rotation interval: 05 sec.
Display text in: English GB
CX34
MENU
Exit Accept
ENT
Software version: CX44/54 4.00
TL50 version: Not connected
AT44 version: HW rev.: 2, SW: 12.34
GPS receiver type: N12000
PAGE rotation interval: 05 sec.
Display text in: English GB
CX44/54
MENU
Exit Accept
ENT
Scroll up/down to go to the function you wish to change
0-9
Key in new values, or...
+/-
Toggle between available values
ENT
Confirm changes, or...
MENU
exit function without making any changes
Speed alarm - can be set to maximum and/or minimum cruis-
ing speed. This may be handy for trawl fishing, entering harbors
with speed limits, etc. Speed stability and time of response can be
adjusted in Pilot/Position setup, press [MENU], [8], [PILOT], and
use the cursor key to go to “Speed and course filter level” to adjust
the setting, confirm with [ENT].
 Press [CLR] to reset an alarm - this applies to all activated alarms.