Operator`s manual

Chapter 10-12 Setup menu
Depth / altitude in - can be set to meters (m), feet (ft) or fathoms (fm).
Distance in - can be calculated in nautical miles (nm), kilometers
(km) or statue miles (mi).
Speed in - can be shown in knots (kn), kilometers/hour (kh) or
miles/hour (mh).
Temperature in - can be shown in Celcius or Fahrenheit.
Pressure in - can be shown in Psi or Pascal (kPa).
Volume in - can be shown in liter or gallon.
Software version - indicates which software version is installed in
the unit.
TL50 version (CX44/54) - indicates if a TL50 Turbo Loader is con-
nected and which software version is implemented.
AT44 version (CX44/54) - indicates if an AT44 SimNet converter is
connected and which revision hardware and software is implemented.
Serial number (CX34) - indicates the unit’s internal serial number.
Interface software version (CX34) - indicates which version is
installed in the CX34 unit (for technicians only).
GPS receiver type - indicates which type is installed in the unit (for
technicians only).
PAGE rotation interval - can be set to anywhere between 03 to 99
seconds. Refer to “Fundamentals of the display and page system” in
section 2.1 for more details on how the function works.
Display text in - as standard the CX34/44/54 is supplied with the
following national display languages: Danish (DK), English (GB)
and (US*), French (F), German (D), Italian (I), Dutch(NL), Spanish
(E), Swedish (S), and Portuguese (P).
*) The difference from GB English to US English is: Celcius is
changed to Fahrenheit, meter is changed to feet, and the date presen-
tation is changed from dd.mm.yy to mm.dd.yy.