Operator`s manual

Setup menu Chapter 10-27
10.8 Factory settings
DELETE MEMORY: It will be possible to erase a single category
of objects entered into the unit by the user - for example, if moving
to a different place in the world you may no longer need the routes
etc. you have in the memory. However, an alternative is to store the
data on a DataCard or disc - refer to section 9.9.
FACTORY PRESETS: If the unit is still ‘alive’ but has ceased to
respond to normal operation, it could become necessary to return to
the factory presets - but first check ‘Troubleshooting’ in section 11.1.
MENU
Call up the menu bar, and...
8,4
activate the display for Factory settings
DELETE MEMORY:
1
Delete all WAYPOINTS
2
Delete all ROUTES
3
Delete all LINES
4
Delete all TRACKS
5
Delete all TARGETS
Used memory: 0%
FACTORY PRESETS:
6
Return to SimNet/NMEA presets
7
Return to CHART presets
8
Return to RADAR presets
9
Return to SOUNDER presets (with echo-module)
CLR
Return to all factory presets
0
Show test display
MENU
Exit
To activate any of the functions, please follow the instructions in
the display. However, any attempt to make any type of change, will
first of all generate a WARNING display to inform you that you are
about to erase some or all data/settings.
ENT
If you are absolutely sure, press [ENT] to complete the job
MENU
If not absolutely sure, press [MENU] to exit function without having
made any changes