Operator`s manual

Chapter 2-2 Fundamentals & initial start-up

Long press on the [PAGE] key will start

a rotation of the four pages in intervals of

5 seconds (increase/decrease the time in

[MENU], [8], [1]). Press any key to stop

rotation.

2.1.1 How to exchange a page in the PAGE system

The four pages in the PAGE system are collected from the RADAR,

CHART, ECHO and PILOT menus in the sequence of which the

function keys appear on the keypad ie. the first page is from the

RADAR function, the second page is from the CHART function, the

third page is from the ECHO function, and the fourth page is from

the PILOT function. This sequence can not be changed, only the

choice of display collected from each function can be changed e.g.:

PAGE

Press the [PAGE] key until the full screen Chart display appears

Call up the menu bar, and...

2,2

collect the Dual Chart display

- or you can toggle between the available displays in the CHART

function by pressing (long press) the [CHART] key repeatedly.

The same applies for the other three pages in the PAGE system ie.

press the [PAGE] key until a display from the RADAR, ECHO or

PILOT function appears and then collect a new display from the

appropriate menu.

) The display sequence under the function keys is the same as the

display sequence in the matching menu.

2.1.2 How to select a new display in a custom screen

In custom screens with multiple window combinations, all dis-

plays, which are not main function displays, are exchangeable. It is

also possible to change the right half of the screen from half screen

window to two quarter windows and vice versa. Example:

Call up the menu bar, and...

Highlight a function e.g. Route calculation in the WP/RTE menu.