Operator`s manual

CX34/44/54 NavStation Index
Interface setup 10-13
- description of sentences 10-23,10-25
-
return to SimNet/NMEA presets 10-27
Introduction 1-1
Key functions 2-3
-dedicated function keys 1-4
Key symbols in manual 1-2
Language 2-9,10-11
Light in display 2-9
Lines,
- delete all 9-10
- draw new line 4-15
- edit via chart 4-10,4-11
- edit via menu 9-10
- line list 9-9
- stored in the memory 9-9
Local time and date 10-9
Log 6-6,6-7
- reset 6-7
- speed calibration 10-17
Loran C 8-6
- list of Loran C chains 8-6
Maintenance 11-3
Master reset 10-28
Measurement units 10-11,A-1
- setup 10-11
Memory,
- delete 10-27
- used 10-27
Menu bar 2-5
Menu layout 2-6
Miscellaneous menu 8-1
MOB function III
- alarm and navigation 6-19
- check last activated MOB 6-19,9-15
- external switch 10-20
- turn MOB function off 6-19
Naming of routes, points, etc. 2-8
Navigation,
- advance to next point 4-14
Navigation - continued,
- Approx.Velocity Necessary 6-10
- auto waypoint shift 6-3
- cursor navigation 6-14
- Estimated Time of Arrival 6-10
- examples 6-14
- highway display 6-5
- orientation on chart 4-17
- restart to approaching point 4-14
- route navigation 6-16
- set & drift display 6-12
- setup 6-3
- simulator 10-15,A-2
- track navigation 6-17
- trim & highway display 6-11
- turn navigation off 4-14,6-15
- waypoint navigation 6-15
NMEA/SimNet interface 10-13
-
return to SimNet/NMEA presets 10-27
NMEA0183 sentences 10-23
NMEA2000 sentences 10-25
Page system 2-1
- exchange a display 2-2
- exchange a page 2-2
- rotation inverval 10-11
Palette setup 10-25
PC-Planner 9-20
PDOP limit 8-8
Pilot menu 6-1
- custom display 6-1,6-13
- ETA & AVN 6-10, A-1
- highway display 6-3,6-5
- NAV active 6-5
- NAV inactive 6-3
- shortcut to pilot serie 6-1
PLOT menu 4-15
- draw line 4-15
- make route 4-15
- plot ship’s position as WP 4-15
- plot target 4-15
- plot waypoint 3-25,4-15
- set vertical mark 4-15