Operator`s manual

CX34/44/54 NavStation Index
Radar functions - continued,
- tuning reference 10-2
- zero/range timing 10-2
Repair and service 11-3
Routes,
- calculation 9-8
- delete all 10-27
- edit via chart 4-10,4-11
- edit via menu 9-4,9-5,9-6
- make new route from WP list 9-6
- menu 9-1
- navigation 6-16
- navigation setup 6-3
- plot new route 4-15
- route list 9-3
- stored in the memory 9-3
- time to go 9-8
Safety summary 1-2
Satellite status 8-7
Satellites in SDGPS system 8-13
- tracking state 8-13
Sections IV
Setup menu 10-1
Show test display 10-27
SimNet/NMEA interface 10-13
-
return to SimNet/NMEA presets 10-27
Software version 10-11
Specifications 11-4
Speed,
- average 6-9
- diagram 8-3
- display as SOG/STW 10-9
- dual speed display 6-9
- filter 10-9
- over ground 6-6,8-4
- setup 10-11
- through water 6-9
Status indicator and accuracy 6-7
Symbols 2-7
Targets,
- delete all 10-27
- edit via chart 4-13
Targets - continued,
- plot new target 4-15
- setup / edit target 9-14,9-15
- stored in the memory 9-14
Track function 9-11
- auto trackpoint shift 6-3
- delete all 10-27
- display track 9-11
- edit via chart 4-12
- edit via menu 9-13
- interval 9-11
- line type 9-12
- navigation 6-17
- navigation setup 6-3
- start / stop track 9-11
- stored in the memory 9-12
- track list 9-12
- trackpoints 9-11
Troubleshooting 11-1
UTC time and date 6-6,10-9
Warranty end of manual
Waypoints,
- auto waypoint shift 6-3
- delete all 10-27
- edit via chart 4-9
- edit via menu 9-2
- menu 9-1
- navigation 6-15
- navigation setup 6-3
- plot new waypoints 4-15
- stored in the memory 9-1
- WP list 9-1
Wind display 8-1
- setup 8-2
- wind direction 8-1
- wind relative to the vessel 8-1
- wind speed, apparent or true 8-1
WR20 RemoteCommander 2-10
XTE - cross-track-error 9-4,9-8,6-5,A-3