Operator`s manual

Chapter 3-28 Radar menu

Composition - materials such as metal and water are good reflec-

tors. Others, such as wood and fiberglass are poor reflectors.

3.3 Demo mode

For the purpose of a demonstration, the radar function has a demo

mode, which can present a simulated radar picture without having a

radar scanner connected.

 Warning! Any adjustments/setups already made to the radar func-

tion will return to default settings when selecting the Demo mode.

To activate the demo mode:

Call up the menu bar, and...

Open the SETUP menu

RADAR

Load the Radar setup

- a warning will pop up that you are about to change settings for the

radar, press [MENU] to abandon, or [ENT] to continue.

Use the cursor to go to ‘Scanner type’, and select ‘Demo’ with the

+/- keys

ENT

Accept change & exit Radar setup

ENT

Call up Radar quick menu

RADAR

Turn ‘Power on’

- the legend ‘Detecting’ will appear on the screen for a short while,

then a countdown of 20 seconds will start before the system enters

Standby mode. It now says ‘Standby’ on the screen.

ENT

Call up Radar quick menu

GOTO

Start transmission

+/-

Use the +/- keys to adjust the range and presentation

The legend Demo will stay in the top left of the screen to indicate

the demo mode is active.