Specifications

Chapter 2-2 EQ33 Fundamentals & initial start-up
Toggle between the four pre-set pages manually:
PAGE
Press the [PAGE] key - again and again - to toggle between the 4
pre-set pages, which as default are: Echo 200kHz display, Depth &
temperature diagram, Position display, and Highway display.
Toggle between the four pre-set pages automatically:
PAGE
Hold the [PAGE] key depressed for two seconds to start a rotation of
the 4 pages in intervals of 5 seconds - this interval can be changed,
refer to section 7.1. Press [PAGE] again to return to normal opera-
tion.
Example of how to change a pre-set page:
For instance, if you wish to have the Echo 50kHz display inserted in
the PAGE sequence instead of the Highway display:
PAGE
Press the [PAGE] key until the Highway display appears
MENU
Call up the menu bar, and...
3,1
then call up the Echo 50kHz display
 The same display can be selected for view in more than one page
if it is selected via the menu. The hotkeys: [STND], [B-LCK] and
[ZOOM] will jump to the page with the desired display - if it’s there,
and if it’s not: it will replace the display in the active page.