Specifications

Chapter 2-6 EQ33 Fundamentals & initial start-up
2.5 Initial start-up
PWR
To turn on the EQ33, press and hold the [PWR] key till a picture
appears on the screen
ENT
Press [ENT] when the legend ‘System Ready’ appears on the screen
PWR
Press [PWR] again to adjust the lighting in the screen and select day
or night display etc., move around in display by means of the cursor
key and change settings with +/- keys, and...
ENT
Confirm with [ENT]
Customizing the EQ33 to suit individual needs can be done as you
go along i.e. choose a different color for the display background,
text, menu, etc. But to start out it will be wise to select the display
language you prefer to use:
MENU
Call up the menu bar, and...
5,1
press [5], [1] to call up the language display
Press up on the cursor to jump to the bottom line in the display
+/-
Select language
ENT
Confirm entry
The EQ33 has a demo program, which can be activated in the
Echosounder setup display, refer to section 5.8.
 When a transducer has been installed and selected, and the echo-
sounder is set up and ready to perform, please make sure that the
demo mode is switched OFF.
2.6 Turn power off
PWR
Call up INFO window, and...
PWR
Press and hold until screen turns black
The EQ33 is now turned off. All the data and setups are saved and
stored in the internal memory and, of course, will be available next
time the unit is turned on.