Installation manual

Simrad38-7
Mountingprocedure[088759]
1)Removenutsandwashersbeforemountingthetransducerinthesteelblister .
2)Jackupthetransducerintothesteelblister .fastenthetransducerwithfourmountingscrews.
3)Removetheprotectingplate.
Protectiveplate:
519-088758(12and18kHztransducers)
519-074659(38kHztransducers)
Allmeasurementsinmm.
Thedrawingisnotinscale
820-088759Rev .B
CD01702-012Page1of1
38
130003/D