Instruction manual

MAINTENANCE
20221511 / C 31
TB3
F8
F1
F2
F3
F4
F5
TB2
F7
F9
F6
TB1
WARNING Make sure that power is disconnected from
pin 1-4 on TB3 before any fuses are replaced!
Note! The fuses in the Compact Control unit are open glass type and
may be damaged if handles with force.
1 Pull the broken fuse up from the holder.
2 Re-install a new fuse by carefully pushing it into the
holder. When correctly located, it should be fixed 1-2mm
above and parallel with the mounting level.
F1 – F5
(1A)
F8
(6.3A)
F6, F7
AND F9
TB3