Installation manual

* Depends on multipath environment, number of satellites in view, satellite
geometry, baseline length (for local services), and ionospheric activity
** Depends on multipath environment, number of satellites in view, and satellite
geometry
*** NAVICO Proprietary RAIM Message ($PMVXG, GBS)
G E N E R A L
Reciever Type L1, C/A code, with carrier phase smoothing
Channels 12-channel, parallel tracking (10- channel
when tracking SBAS
)
Position Update Rate 1 Hz default (Position) up to 10 Hz heading
and position output (optional)
Horizontal Accuracy < 1 m 95% (DGPS)*
< 5 m 95% (autonomous, no SA)**
Heading Accurac
y
< 0.5 degrees rms.
Rate of Turn 90°/s max
Pitch / Roll Accuracy < 1 degree rms
Start-Up Time
< 60 s typ
.
Heading Fix < 20 s
Satellite Reacquisition < 1 s
D I F F E R E N T I A L B E A C O N S E N S O R S P E C I F I C AT I O N S
Channels 2-channel, parallel tracking
Frequency Range 283.5 to 325 kHz
Operating Modes Automatic and Manual
Sensitivity 2.5μV/m for 6 dB SNR @ 200 bps
Dynamic Range 100 dB
Ajacent Channel Rejection 61 dB @ f ° ± 400 Hz offset
C O M M U N I C A T I O N S
Serial Ports 3 full duplex RS-232 & 2 half-duplex RS-422
Isolation
All serial ports optically isolated from power
supply
Baud Rates 4800, 9600, 19200
Data I/O Protocol NMEA 0183 V3.0
Correction I/O Protocol RTCM SC-104,
NMEA Heading Messages
GPHDT, GPROT, PSAT, HPR, GGA, VTG,
ZDA, GSA, GSV, GST, GBS***, GRS
E N V I R O N M E N TA L
Operating Temperature -30°C to +70°C
Storage Temperature -40°C to +85°C
Humidity
100% condensing
Dimensions:
60 cm (l) x 16 cm (w) x 18 cm (h) (Not including
mounts)
Weight: 1.5 kg \ 3.31 lbs
P O W E R
Input Voltage 10.5 to 32 VDC
Isolated Power supply isolated from serial ports
Reverse Polarity Protection Yes (but not reverse polarity operation)
Power Consumption < 4.5 W
Current Consumption < 360 mA @ 12.0 VDC
M E C H A N I C A L
Dimensions
60 cm (l) x 16 cm (w) x 18 cm (h) (Not
including mounts)
Weight < 1.5 kg
Power Data Connector 18-pin, Environmentally sealed
M O U N T I N G O P T I O N S
1”-14 TPI Pole Mount or Fixed Mount
Brackets (mounting brackets are provided)
M X 5 7 5 A S P E C I F I C AT I O N S
18.4 cm 7 1/8î ( )
1 in.- 14 TPI Mount
10.2 cm (4î)
1 in.- 14 TPI Mount
18.2 cm (7 1/8î)
8.9 cm (31/2î)
M X 5 2 1 A M X 4 2 1 B - 1 0
31
Professional Series Navigation Systems