Operation Manual
Changing the default settings | 31
SimNet group function
The SimNet group function provides global control of
groups of units. This option is used on larger vessels
where many units are connected via the SimNet network.
By assigning several units to the same group, a function
change or update on one unit will have the same effect
on the rest of the group members.
The table below shows available SimNet groups.
Function Groups Default
Display Simrad, None, 1-6 Simrad
Sources Simrad, None Simrad
Units Simrad, None, 1-6 Simrad
Language Simrad, None, 1-6 Simrad
Damping Simrad, None, 1-6 Simrad
Alarm Simrad, None, 1-6 Simrad
Power save Simrad, None, 1-6 None
Simrad: Default group for IS20 -
None: Not assigned to a group -
1–6: Group numbers -
The figures on next page illustrates how the instruments
on a flybridge and in a cockpit are assigned to separate
language, damping and display groups, and how this
affects the setup for the different instruments.
The SimNet groups are congured during system
conguration. Further information about how to set up
the groups are found in SimNet groups, page 52.