Specifications

Simrad MS50 – Chapter 4. Data Service 4.21
Menu
MenuMenu
Data/printer port setup cont’d
Data/printer port setup cont’d
Procedure
1 Select the function Menu:
2 Scroll down to
Data/printer
port setup:
3 Selct or right
arrow selects the
Data/printer port
setup window:
Bit rate:
4 Edit or right
arrow opens list
of bit rates:
5 Scroll up/down
to required data/
printer bit rate:
Note!
It is recommended
to use 9600 bps for
data communication.
6 Selct enters the chosen rate:
Printer:
For output to printer, select bit rate according to printer specifications.
7 Scroll down to
printer:
Enable/Disable
the DATA port for
printing, as required .
AT modem:
8 Scroll down to AT modem:
Enable/Disable the DATA port for
AT modem as required .
ªI
3 – Data/printer port setup
Bit rate: 9600 bps –
Printer : Disabled
AT modem: Enabled
Hot dial: Enabled
Initial mode: AT mode
ªO
Available bit rates
1200 bps
2400 bps
4800 bps
> 9600 bps
19200 bps
38400 bps
ªI O
470 SIM Selct
Ctrl + T for Help <+U> <+I> <+O> <+P>
ªO
Menu
Function menu
Set access level
003> Data/printer port setup >
Phone setup menu
470 SIM Edit Save
Ctrl + T for Help <+U> <+I> <+O> <+P>
3 – Data/printer port setup
> Bit rate: 2400 bps _ >
Printer : Enabled
AT modem: Disabled
Hot Dial: Enabled
Initial mode: AT mode
470 SIM Enab Disab Save
Ctrl + T for Help <+U> <+I> <+O> <+P>
3 – Data/printer port setup
Bit rate: 9600 bps
> Printer : Enabled _ >
> AT modem: Enabled >
Hot Dial: Disabled
Initial mode: AT modem
Recommended port setup
Mode Output to printer Data com. (AT) Data com. (DTR dialing)
Printer: Enabled Disabled Disabled
AT modem: Disabled Enabled Disabled
Hot dial: Disabled Disabled Enabled