Installation Instructions

RADAR | NSS Installation Manual

RADAR

Broadband radar (BR24 and 3G)

NMEA2000 cables

SimNet cables

Ethernet cable

Ethernet cables if

using NEP-2

FUSE

Magnetic heading source

required for Chart overlay

/ MARPA

SimNet Network

Brown RX-

White RX+

AT10HD

NMEA083 to SimNet

Converter Heading Only

Cut off 12 Pin

plug to expose bare wires

NMEA0183 10 Hz Heading

(e.g Gyro, Sat Compass)

Alternative: NMEA0183 heading

TX-

TX+

SimNet

Ethernet

Key Description Notes

1 NSS display

2 BroadBand™ Radar Scanner

3 Interconnection cable Standard 20 m (65 ft) cable. Optional

lengths: 10 m (33 ft) and 30 m (98 ft)

4 RI10 Radar interface box

5 Ethernet cable Radar supplied with a 1.8 m (6 ft) cable

6 Ethernet cables Additional required to connect radar via a

NEP-2

7 Ethernet expansion port NEP-2 (000-

0132-031)

8 SimNet to Micro-C cable

9 SimNet drop cable. Allows display to receive heading informa-

tion for chart overlay and MARPA

10 RC42 Heading Sensor (22090195)

11 AT10HD NMEA0183-SimNet Converts NMEA0183 to SimNet /

NMEA2000 (Only heading information is

converted)

12 SimNet backbone