Specifications

Radar operational modes
The radar’s operational modes are controlled from the NSS evo2 unit. The following modes
are available:
Off
The power to the radar scanner is turned off
Standby
The power to the radar scanner is on, but the radar is not transmitting.
Transmit
The scanner is on and transmitting. Detected targets will be drawn on the radar PPI (Plan
Position Indicator).
Radar Range
Enter a short description of your concept here (optional).
You adjust radar range by turning the rotary knob or by tapping the zoom icons on the radar
panel.
Using the cursor on a radar panel
Enter a short description of your concept here (optional).
The cursor is by default not shown on a radar panel.
When you tap the radar panel the cursor and the cursor window is activated.
The cursor can be used to measure a distance to a target, and to select targets as described
later in this section.
To remove the cursor and cursor elements from the panel, select Clear cursor or press the X
key.
GoTo cursor
Enter a short description of your concept here (optional).
You start navigating to a selected position on the image by tapping the screen, then using
the go to cursor option in the menu.
The Cursor assist function
Enter a short description of your concept here (optional).
The cursor assist function allows for fine tuning and precision placement of the cursor
without covering details with your finger.
Press and hold your finger on the screen to switch the cursor symbol to a selection circle,
appearing above your finger.
Without removing the finger from the screen, drag the selection circle over the desired item
to display item information.
When you remove your finger from the screen the cursor reverts to normal cursor operation.
Saving waypoints
Enter a short description of your concept here (optional).
You can save a waypoint at a selected position by tapping the panel, then selecting the new
waypoint option in the menu.
• If your unit has a MARK key, you can press this key to immediately save a waypoint. If the
cursor is active the waypoint will be saved at cursor position. If the cursor is not active the
waypoint will be saved at your vessel's position.
50
Radar | NSS evo2 Operator Manual