Operation Manual

Robertson AP300X Autopilot
110 22081814H
 Go through the user SETUP menu and show how to (and why)
change the settings.
 Also include Nav. source, Pos. source and Wind sensor selection if
applicable.
 Show the owner where the compass (or compasses) is mounted
and instruct him to keep magnetic items away.
 Show where the Mains circuit breaker is.
If an AP300DLX is installed, provide the user with the following
additional instructions:
 Setting the POS source in the USER SETUP menu
 Setting the AP300DLX as the NAV source in the USER SETUP
menu.
 Go through each of the primary screens in the AP300DLX:
 How to input waypoints
• Manual input
• Saving present position
 How to steer to waypoints
• Stored waypoints
• TEMP waypoint
• MOB waypoint
 Navigating with waypoints in the AP300DLX and the pilot in NAV
mode
 Building routes from previously saved waypoints
 Navigating with routes in the AP300DLX and the pilot in NAV
mode