Operation Manual

Maintenance
22081814H 113
*
WHEN INSERTING NEW EPROMS, MAKE SURE
THE CUT-OFF CORNER MATCHES WITH THE
ONE IN THE SOCKET.
PRESS IT GENTLY INTO THE SOCKET.
*
*
REMOVE THE EPROM FROM THE SOCKET BY
MEANS OF THE SPECIAL EXTRACTION TOOL
(P/N 44139806)
SQUEEZE THE TOOL AND PULL OUT
THE EPROM
*
*
INSERT THE TOOL BY PRESSING THE TWO
GRIP PINS DOWN INTO THE TWO SLOTS IN
THE CORNERS OF THE SOCKET
GRIP PINS
AFTER CHANGE OF EPROM, PERFORM A MASTER RESET AS
DESCRIBED ON PAGE 3-34.
*
THE IDENTIFICATION TAG INDICATES:
- NAME OF UNIT
- ROBERTSON PART NUMBER
- SOFTWARE VERSION
WARNING:
MAKE SURE THAT THE RIGHT EPROM IS
MOUNTED IN THE ACTUAL UNIT.
EPROM FOR ALL AP300X CONTROL UNITS:
PART NO. 22081467
- LANGUAGE ITEM #1 SOFTWARE VERSION V.R. 1
(ENGLISH, GERMAN, FRENCH, SPANISH, ITALIAN)
- LANGUAGE ITEM #2 SOFTWARE VERSION V.R. 2
(ENGLISH, GERMAN, DUTCH, SWEDISH, NORWEGIAN)
PART NO. 22081475
EPROM FOR J300X, J300X-40 AND J3000X
JUNCTION UNITS:
PART NO. 22081640
CUT-OFF
CORNER
IDENTIFICATION
TAG
SLOTS