Operation Manual
Table Of Contents
- AP300X INSTRUCTION MANUAL
- FRONT MATTER
- GENERAL INFORMATION
- Introduction
- How to use this manual
- System components
- Optional components
- NI300X NMEA Interface Unit
- CI300X Compass Interface
- Rudder" indicator
- Compass" Indicator
- CDI35 Course Detector Interface
- LF3000 Linear Feedback
- LFI3000 Linear Feedback Interface
- Robnet cables
- R3000X Remote Control
- S100 NFU steering lever
- S3 NFU steering lever
- JP300 Jack Point
- Mounting brackets
- Top mount bezel
- Flush mount bezel
- AP300X AUTOPILOT OPERATION
- Overview
- AP300X with MSD50 Stern Drive unit
- ON/OFF / Standby mode
- Automatic Steering
- Navigating with the AP300X
- Wind vane steering
- Automatic Speed selection
- Multiple station system
- Lock function
- The User Set-up Menu
- AP300DLX Main features
- Operation of Graphic Display
- Waypoints
- Routes
- Navigating with the AP300DLX
- Glossary
- INSTALLATION
- General
- RF300 Rudder feedback installation
- Junction unit installation
- Drive unit installation
- Control unit installation
- RFC35 Fluxgate Compass installation
- JP300 Jack Point installation
- R3000X Remote Control installation
- S3 NFU Lever installation
- S100 NFU Lever installation
- Interfacing
- Software Setup Procedure
- Sea Trial
- MAINTENANCE
- TROUBLE SHOOTING
- TECHNICAL SPECIFICATIONS
- AP300X AUTOPILOT SPARE PARTS LIST
Robertson AP300X Autopilot
120 22081814H
6.2 Control Units (AP300CX, AP300PX, AP300DLX)
Autopilot Display:
Type: ............................................... Backlit LCD matrix display
Resolution: .............................................................. 80 x 32 pixels
Graphic Display (AP300DLX only):
Type:.................................................Backlit LCD matrix display
Resolution:............................................................160 x 128 pixels
Push buttons:.............................................................. Tactile silicone pads
Material:............................High quality Bayblend(ABS/Polycarbonate)
Colour:................................................................................................... Black
Illumination:
LCD display and Push buttons: .......... Adjustable in 10 steps
Environmental Protection: .................................................................. IP56
Safe distance to compass: ................................................................... 0.4 m
Temperature:
Operating: ...................................... 0 to +55 °C (+32 to +130 °F)
Storage: ......................................... -30 to +80 °C (-22 to +176 °F)
6.3 Junction units
Reverse voltage protection: ........................................ Yes (not J300X-40)
Power consumption: .................................................. 5 Watt (electronics)
Heading Sensor input: .................... Composite pulse width modulated
Rudder feedback input: ......... Frequency signal, 3400 Hz., 20 hz/deg.
Rudder feedback units: ...................................................... RF300 or RF45
External Alarm: .................................................................. Open collector
Temperature range:
Operation: ...................................... 0 to +55 °C (+32 to +130 °F)
Storage: ........................................ –40 to +80 °C (-40 to +176 °F)
Mounting: ........................................................................ Bulkhead mount
Material: .............................. Anodized aluminum and black ABS cover
For other specifications please refer to pages 12 and 70.