Operation Manual
Table Of Contents
- AP300X INSTRUCTION MANUAL
- FRONT MATTER
- GENERAL INFORMATION
- Introduction
- How to use this manual
- System components
- Optional components
- NI300X NMEA Interface Unit
- CI300X Compass Interface
- Rudder" indicator
- Compass" Indicator
- CDI35 Course Detector Interface
- LF3000 Linear Feedback
- LFI3000 Linear Feedback Interface
- Robnet cables
- R3000X Remote Control
- S100 NFU steering lever
- S3 NFU steering lever
- JP300 Jack Point
- Mounting brackets
- Top mount bezel
- Flush mount bezel
- AP300X AUTOPILOT OPERATION
- Overview
- AP300X with MSD50 Stern Drive unit
- ON/OFF / Standby mode
- Automatic Steering
- Navigating with the AP300X
- Wind vane steering
- Automatic Speed selection
- Multiple station system
- Lock function
- The User Set-up Menu
- AP300DLX Main features
- Operation of Graphic Display
- Waypoints
- Routes
- Navigating with the AP300DLX
- Glossary
- INSTALLATION
- General
- RF300 Rudder feedback installation
- Junction unit installation
- Drive unit installation
- Control unit installation
- RFC35 Fluxgate Compass installation
- JP300 Jack Point installation
- R3000X Remote Control installation
- S3 NFU Lever installation
- S100 NFU Lever installation
- Interfacing
- Software Setup Procedure
- Sea Trial
- MAINTENANCE
- TROUBLE SHOOTING
- TECHNICAL SPECIFICATIONS
- AP300X AUTOPILOT SPARE PARTS LIST

Technical Specifications
22081814H 123
Robnet network interface: ..................................... 2 network connectors
Cable inlets: .............................. Rubber glands for cable diam 10-14mm
Mounting: ........................................................................ Bulkhead mount
Material: ............................................................. Epoxy coated aluminum
Environmental Protection: .................................................................. IP44
Temperature range:
Operation: ...................................... 0 to +55 °C (+32 to +130 °F)
Storage: ......................................... -30 to +80 °C (-22 to +176 °F)
6.9 LF3000 Linear Feedback
Stroke: .............................................................................................. 300 mm
Operating principle: .. Variable differential transformer, exitation and
signal conversion by separate LFI3000 Interface unit
Power: ........................................................................ Supplied by LFI3000
Dimensions: ............................................ 465 mm (18,3") x 22 (0,86") dia.
Mounting: ....................................................... Clamped to hydraulic ram
Material: ..........Rod: ..................................................................... Stainless
Tube: .....Epoxy coated sea water resistant aluminium
Environmental protection: .................................................................. IP67
6.10 LFI3000 Feedback Interface
Supply: ......................................................................... From Junction Unit
Output signal ......................... Polarity independent variable frequency
Frequency resolution ................ Center 3400Hz, 20Hz/degree equal to
1,7 mm travel
Linearity: ................................ +/- 3 degrees up to 45 degrees of rudder
Cable supplied: .................................................... 1,5 m TP shielded cable
Dimensions: ......................................... 160 mm x 126 mm (6.3 in x 5 in.)
Weight: ................................................... 0,7 kg including cable (1,6 lbs.)
Power consumption: .................................................................... 0,9 watts
Temperature range:
Operation: ..................................... 0 to +70 °C (+32 to + 158 °F)
Storage: ......................................... -30 to +80 °C (-22 to +176 °F)
Environmental Protection: .................................................................. IP56
Mounting: ....................................................................... Deck or bulkhead
Material: ...................................................................................... Black ABS