Operation Manual
Table Of Contents
- AP300X INSTRUCTION MANUAL
- FRONT MATTER
- GENERAL INFORMATION
- Introduction
- How to use this manual
- System components
- Optional components
- NI300X NMEA Interface Unit
- CI300X Compass Interface
- Rudder" indicator
- Compass" Indicator
- CDI35 Course Detector Interface
- LF3000 Linear Feedback
- LFI3000 Linear Feedback Interface
- Robnet cables
- R3000X Remote Control
- S100 NFU steering lever
- S3 NFU steering lever
- JP300 Jack Point
- Mounting brackets
- Top mount bezel
- Flush mount bezel
- AP300X AUTOPILOT OPERATION
- Overview
- AP300X with MSD50 Stern Drive unit
- ON/OFF / Standby mode
- Automatic Steering
- Navigating with the AP300X
- Wind vane steering
- Automatic Speed selection
- Multiple station system
- Lock function
- The User Set-up Menu
- AP300DLX Main features
- Operation of Graphic Display
- Waypoints
- Routes
- Navigating with the AP300DLX
- Glossary
- INSTALLATION
- General
- RF300 Rudder feedback installation
- Junction unit installation
- Drive unit installation
- Control unit installation
- RFC35 Fluxgate Compass installation
- JP300 Jack Point installation
- R3000X Remote Control installation
- S3 NFU Lever installation
- S100 NFU Lever installation
- Interfacing
- Software Setup Procedure
- Sea Trial
- MAINTENANCE
- TROUBLE SHOOTING
- TECHNICAL SPECIFICATIONS
- AP300X AUTOPILOT SPARE PARTS LIST
Spare Parts List
22081814H 127
NI300X NMEA Interface
22081129 NI300X NMEA Interface
20191607 Robnet cable 7m
22081913 NI300X PCB Ass'y
20193256 Box
20193264 Cover
44138816 Cover nutknobs
Robnet cables and connectors
22081145 Robnet cable 15 m (49") with one male connector
20191607 Robnet cable 7m (23') with male connectors
20191615 Robnet cable 15m (49') with male connectors
20192266 Robnet extension cable 10m (33') with male and female
connector
44138048 Robnet cable (bulk)
44160844 Male connector - crimp type
44160851 Female connector - crimp type (for extension cable only)
Tools
44139707 Key for Lock ring on Robnet receptacles
44139806 Extraction tool for PROM
44161792 Robnet pin extraction tool (for crimp type connectors)