Operation Manual
Table Of Contents
- AP300X INSTRUCTION MANUAL
- FRONT MATTER
- GENERAL INFORMATION
- Introduction
- How to use this manual
- System components
- Optional components
- NI300X NMEA Interface Unit
- CI300X Compass Interface
- Rudder" indicator
- Compass" Indicator
- CDI35 Course Detector Interface
- LF3000 Linear Feedback
- LFI3000 Linear Feedback Interface
- Robnet cables
- R3000X Remote Control
- S100 NFU steering lever
- S3 NFU steering lever
- JP300 Jack Point
- Mounting brackets
- Top mount bezel
- Flush mount bezel
- AP300X AUTOPILOT OPERATION
- Overview
- AP300X with MSD50 Stern Drive unit
- ON/OFF / Standby mode
- Automatic Steering
- Navigating with the AP300X
- Wind vane steering
- Automatic Speed selection
- Multiple station system
- Lock function
- The User Set-up Menu
- AP300DLX Main features
- Operation of Graphic Display
- Waypoints
- Routes
- Navigating with the AP300DLX
- Glossary
- INSTALLATION
- General
- RF300 Rudder feedback installation
- Junction unit installation
- Drive unit installation
- Control unit installation
- RFC35 Fluxgate Compass installation
- JP300 Jack Point installation
- R3000X Remote Control installation
- S3 NFU Lever installation
- S100 NFU Lever installation
- Interfacing
- Software Setup Procedure
- Sea Trial
- MAINTENANCE
- TROUBLE SHOOTING
- TECHNICAL SPECIFICATIONS
- AP300X AUTOPILOT SPARE PARTS LIST
General Information
22081814H 15
Rudder" indicator
110mm
110mm
17mm 18mm
50mm Dia.
Dataline
Light
Function
A Robertson Dataline instrument that can be connected directly to one
of the AP300X NMEA outputs. Analogue display of boat's rudder
angle.
Compass" Indicator
A 12 V Dataline instrument that displays the boats heading on both
digital and analogue format. Can be connected directly to NMEA
output on the junction unit.
Dimensions and weight as for "Rudder" Indicator.
CDI35 Course Detector Interface
Interface unit to connect autopilot to a magnetic compass with CD100
Course Detector. Provides exitation current for CD100 and converts the
analogue sin/cos signal to digital format for the autopilot steering
computer.
Weight: 0,9 kg (2,0 lbs)
Weight: 0,2 kg (0,4 lbs)