Operation Manual
Table Of Contents
- AP300X INSTRUCTION MANUAL
- FRONT MATTER
- GENERAL INFORMATION
- Introduction
- How to use this manual
- System components
- Optional components
- NI300X NMEA Interface Unit
- CI300X Compass Interface
- Rudder" indicator
- Compass" Indicator
- CDI35 Course Detector Interface
- LF3000 Linear Feedback
- LFI3000 Linear Feedback Interface
- Robnet cables
- R3000X Remote Control
- S100 NFU steering lever
- S3 NFU steering lever
- JP300 Jack Point
- Mounting brackets
- Top mount bezel
- Flush mount bezel
- AP300X AUTOPILOT OPERATION
- Overview
- AP300X with MSD50 Stern Drive unit
- ON/OFF / Standby mode
- Automatic Steering
- Navigating with the AP300X
- Wind vane steering
- Automatic Speed selection
- Multiple station system
- Lock function
- The User Set-up Menu
- AP300DLX Main features
- Operation of Graphic Display
- Waypoints
- Routes
- Navigating with the AP300DLX
- Glossary
- INSTALLATION
- General
- RF300 Rudder feedback installation
- Junction unit installation
- Drive unit installation
- Control unit installation
- RFC35 Fluxgate Compass installation
- JP300 Jack Point installation
- R3000X Remote Control installation
- S3 NFU Lever installation
- S100 NFU Lever installation
- Interfacing
- Software Setup Procedure
- Sea Trial
- MAINTENANCE
- TROUBLE SHOOTING
- TECHNICAL SPECIFICATIONS
- AP300X AUTOPILOT SPARE PARTS LIST

Robertson AP300X Autopilot
16 22081814H
LF3000 Linear Feedback
Linear feedback unit for boats with outboard engine. Transforms the
linear movement to an analogue signal. Supplied with 8,5 m cable and
mounting clamps.
LFI3000 Linear Feedback Interface
Interface unit for LF3000 Linear Feedback. Converts the analogue
LF3000 signal to the standard digital feedback signal for the autopilot
steering computer.
Robnet cables
Standard Robnet cable (15 m) with one male plug.
7 m (23')
Standard Robnet cable (7 m) with two male connectors.
15 m (46')
Standard Robnet cable (15 m) with two male connectors.
10 m (33')
Robnet extension cable (10 m) with male and female connector.
Weight: 0,7 kg (1,6 lbs)
Weight: 0,8 kg (1,8 lbs)