Operation Manual
Table Of Contents
- AP300X INSTRUCTION MANUAL
- FRONT MATTER
- GENERAL INFORMATION
- Introduction
- How to use this manual
- System components
- Optional components
- NI300X NMEA Interface Unit
- CI300X Compass Interface
- Rudder" indicator
- Compass" Indicator
- CDI35 Course Detector Interface
- LF3000 Linear Feedback
- LFI3000 Linear Feedback Interface
- Robnet cables
- R3000X Remote Control
- S100 NFU steering lever
- S3 NFU steering lever
- JP300 Jack Point
- Mounting brackets
- Top mount bezel
- Flush mount bezel
- AP300X AUTOPILOT OPERATION
- Overview
- AP300X with MSD50 Stern Drive unit
- ON/OFF / Standby mode
- Automatic Steering
- Navigating with the AP300X
- Wind vane steering
- Automatic Speed selection
- Multiple station system
- Lock function
- The User Set-up Menu
- AP300DLX Main features
- Operation of Graphic Display
- Waypoints
- Routes
- Navigating with the AP300DLX
- Glossary
- INSTALLATION
- General
- RF300 Rudder feedback installation
- Junction unit installation
- Drive unit installation
- Control unit installation
- RFC35 Fluxgate Compass installation
- JP300 Jack Point installation
- R3000X Remote Control installation
- S3 NFU Lever installation
- S100 NFU Lever installation
- Interfacing
- Software Setup Procedure
- Sea Trial
- MAINTENANCE
- TROUBLE SHOOTING
- TECHNICAL SPECIFICATIONS
- AP300X AUTOPILOT SPARE PARTS LIST
Robertson AP300X Autopilot
20 22081814H
STBY
OFF
AUTO
SPEED
NAV.
SETUP
DODGE
TURN
NAV Push Button
Navigation mode
Wind mode (sailboat)
Also for: Setup menu and
Installation menu
STBY (Standby) Push Button
Turns the autopilot ON/OFF
Selects STBY mode
Enables/disables lock function
STBY
OFF
PORT Push Button
NFU steering to Port
Also used for scrolling back
through menu items.
Soft Keys
Function dependent
on the menu or function
Menu Push Button
Always returns to the
top level main menu
MENU
MOB
AP300CX CONTROL UNIT
AUTO Push Button
Selects AUTO mode
Selects HI/LO speed
DODGE Push Button
Dodge mode
U-turn
Tacking (sailboat)
DODGE
TURN
Autopilot LCD display
Heading (STBY mode)
Set Course (AUTO mode)
XTE (NAV mode)
Wind angle (WIND mode)
Rudder angle (STBY/AUTO)
Navigator source (NAV)
Also displays:
User setup text
Installation setup text
Alarm messages
STBD Push Button
NFU steering to Stbd.
Also used for scrolling
forward through menu items
AP300PX CONTROL UNIT
AP300DLX CONTROL UNIT
Rotary Course Dial
Course change, Menu selection,
Rudder angle command,
(Follow-Up Mode)
Graphic LCD Display
Rudder angle display
Heading display
Navigation computer
Instrument displays
Plot display
SPEED
AUTO
NAV.
SETUP
AP300X
SPEED
AUTO
NAV.
SETUP
MENU
MOB
DODGE
TURN
STBY
OFF
AP300X
DODGE
TURN
STBY
OFF
AUTO
SETUP
NAV.
SPEED
AP300X
Activates Follow-Up
Mode
Audible alarm reset: Press any button. Refer to page 114 for further
information about alarms.